|Measurement Range||Battery Capacity: 5 – 6,000 Ah|
System Voltage: 0 – 55 VDC
Load Current: ±999.9 A
Unit Voltage: 12 V
|Accuracy||System Voltage: ±0.5% / 0.1 V|
Load Current: ±1% / 0.1 A
Unit Voltage: ±0.5% / 0.01 V
Internal Resistance: ±2% / 0.001 mΩ
Unit Temperature: ±2% / 0.1 °
|Test Speed / Test Load||4 seconds per cell / less than 2 amps AC per cell|
|Measuring Interval||Adjustable from 10 min to 24 hours (voltage & resistance)|
|Operating Environment||Temperature: 0 – 65 °C (32 – 150 °F)|
Relative Humidity: Under 80%
|Power Requirements||Input: 38 – 58 VDC (from connected batteries)|
|Dimensions / Weight||140 x 121 x 44.5 mm (5.5 x 4.8 x 1.8 in)|
Does the BMS-icom calculate the capacity of the batteries?
No, the BMS-icom does not perform a load test, so there is no way for the system to calculate the capacity. The system does detect and record all discharge events to show how each cell performed during the duration of the test.
Can the BMS-icom monitor battery systems in parallel?
No, the BMS-icom is designed for testing of a single system of up to 24 jars / cells.
How does Eagle Eye’s Centroid 2 software work?
The Centroid 2 software is composed of two parts, the server and the client. Centroid 2 Server is installed on a dedicated PC that must be connected to the same network as the BMS-icom system(s). This software runs in the background on a Windows environment as a service. Centroid Viewer client must also be installed on a PC that is on the same network as the BMS-icom. The client can be installed on multiple computers and can pull data directly from the PC with Centroid 2 Server running.
How does the BMS-icom test jar/cell resistance?
The system injects 400mA to 2A (max.) AC current for a duration of 900ms per jar / cell. During the 900ms duration is (3) 300ms tests. The average of these (3) tests is used as the final test result.
Does the BMS-icom AC measurement signal affect the battery’s condition or lifespan?
The level of AC current applied to the battery by the monitoring system during measurement is insufficient to affect battery life, as it is not continuous nor is it a of a level that could cause the temperature to rise during the short period it is applied.
Does the BMS-icom have any dry contact relays?
No, the BMS-icom does not have a native dry contact relay.
Are there any options for using Eagle Eye’s software in addition to Modbus protocol?
Yes, a single BMS-icom can communicate via TCP/IP to a dedicated PC with Centroid 2 installed. Through the software, Modbus protocol can output from the PC. Each BMS-icom system requires its own server PC for this solution and is offered as complete kit.
Is the BMS-icom hardware rated as explosion proof?
The hardware is not officially rated as explosion proof, however it was designed to be mounted and exposed permanently in a battery room environment. If ex-proof is absolutely required then cabinet solutions are available to meet any specific requirements.
If you would like product specific training, please contact Eagle Eye directly. We offer complimentary training over the phone. Quotes can be provided for on site product-training. For more information call 1-877-805-3377 or email us at email@example.com. We provide timely support for all inquiries.
EEU Training Courses
Eagle Eye University (EEU) provides scheduled courses tailored to specific aspects of the critical power industry. All courses are also available at your location. The following courses are applicable to BMS-icom Battery Monitoring System.