Eagle Eye Power Solutions

HS-2000 Flush Mount Electronic Horn/Strobe Signal

This horn/strobe combo emits high-quality signals intended for use in cUL general signaling applications. The xenon beacons with horns are bright, low current, high decibel, combination signals designed for use where a distinctive visual or audible signal is required. The strobes flash at 1fps across their full operating voltage range.

The strobe and horn can be operated independently. It can be flush mounted, designed to mount in a standard 4″ (102mm) square electrical box with extension ring (total min. depth of 3″ (75mm) not supplied.)


  • Flash rate 60 fpm
  • 100 dB at 1 meter/90 dB at 10 ft (measured in anechoic chamber)
  • Low current draw
  • Terminals for easy wiring
  • Gray, engineered thermoplastic housing
  • Suitable for indoor and outdoor applications

Visit Eagle Eye University for information on our battery training courses.



Operating Voltage*24 VAC 50/60 Hz; 24 VDC
Operating Current, Horn**72 mA; 22mA
Operating Current, Strobe**390 mA; 390 mA
Flash Rate (per second)Approximately 1 fps
Sound Level Output at 10 ft. (3.05m) anechoic chamber90 dBA nominal
Operating EnvironmentIndoor: 93% at 90°F (32°C) relative humidity; 32 to 120°F (0 to 49°C) variable ambient temperature.

Outdoor: 98% at 104°F (40°C) relative humidity; -31 to 150°F (-35°F to 66°C) variable ambient temperature.

*The operating voltage to the horn may be continuous or coded such as march time or a temporal pattern meeting ISO8201 (ANSI S3.41) Audible Emergency Evacuation Signal.

**Horn and strobe currents are additive when connected in parallel.


    Eagle Eye Power Solutions respects your privacy. We don't rent or sell your personal information to anyone. Ever. Read our Privacy Policy.