This horn/strobe combo emits high-quality signals intended for use in cUL general signaling applications. The xenon beacons with horns are bright, low current, high decibel, combination signals designed for use where a distinctive visual or audible signal is required. The strobes flash at 1fps across their full operating voltage range.
The strobe and horn can be operated independently. It can be flush mounted, designed to mount in a standard 4″ (102mm) square electrical box with extension ring (total min. depth of 3″ (75mm) not supplied.)
Key Features
- Flash rate 60 fpm
- 100 dB at 1 meter/90 dB at 10 ft (measured in anechoic chamber)
- Low current draw
- Terminals for easy wiring
- Gray, engineered thermoplastic housing
- Outdoor-rated models available upon request
Specifications
| Operating Voltage* | 24 VAC 50/60 Hz; 24 VDC |
| Operating Current, Horn** | 72 mA; 22mA |
| Operating Current, Strobe** | 390 mA; 390 mA |
| Flash Rate (per second) | Approximately 1 fps |
| Sound Level Output at 10 ft. (3.05m) anechoic chamber | 90 dBA nominal |
| Operating Environment | Indoor: 93% at 90°F (32°C) relative humidity; 32 to 120°F (0 to 49°C) variable ambient temperature. Outdoor: 98% at 104°F (40°C) relative humidity; -31 to 150°F (-35°F to 66°C) variable ambient temperature. |
**Horn and strobe currents are additive when connected in parallel.
Resources & Support
FAQs
Request Quote
Complete Your DC Power Solution
PRC-005-6 Battery Operation & Maintenance Compliance
Get trained by industry experts on how battery monitoring can help you meet and maintain compliance with NERC PRC-005-6.
Gas Ventilation Systems
Explore the VS-Series ventilation systems for battery rooms and confined spaces with flammable gases. Available in two sizes, featuring mechanical louvers and integration with hydrogen gas detectors for automatic operation.
Battery Signage
Enhance battery room safety with compliant signage to prevent accidents and meet OSHA requirements with six essential safety signs.