Eagle Eye Power Solutions
1-877-805-3377

BC-1000 SCR Stationary Float Battery Charger

130, 48 & 24V DC

The BC-1000 is a stationary float battery charger designed for use in utility, switchgear, and other industrial environments. Nominal ratings include models at 24, 48, or 130 volts DC and 6 to 50 amps DC. Built-in alarms are included for high DC voltage, low DC voltage, positive and negative ground fault, and end of discharge. The industrial battery charger has digital controls and an LCD display. A number of safety features are included such as wire protection on all field terminals and full AC input and DC output protection. All BC-1000 industrial float battery charger units include a standard 5-year warranty.

Benefici

  • Microprocessor / Digital Control
  • SCR Rectification
  • LCD Display and Navigation Pad
  • Advanced Alarming Capabilities
  • Enhanced DC Output Filtering / Battery Eliminator Options
  • Industrial Construction
  • High Reliability, Durability, and Longevity
  • UL Listed and cUL/CSA Certified
  • Designed to Meet NEMA PE5
  • Made in the USA

Visit Eagle Eye University for information on our battery training courses.

 

specificazioni

Measurement RangeVoltmeter: 0 – 120%
Float Voltage: 2.00 V/C to 2.50 V/C
Equalize Voltage: 2.00 V/C to 2.50 V/C
High DC Voltage Alarm: 1.00 V/C to 2.70 V/C
Low DC Voltage Alarm: 1.00 V/C to 2.50 V/C
End of Discharge Voltage Alarm: 1.00 V/C to 2.00 V/C
Alarm RelayMax Switching Voltage: 150 VDC, 125 VAC
Max. Switching Power: 30 WDC, 60 VA AC
Max. Switching Current: 2.0 A
Max. Carry Current: 2.0 A
MountingWall, floor, shelf, EIA 19-inch rack (rear)
Output Current LimitationAdjustable 0 – 110%
Output Transient Response & Recovery20 – 100% load charge, with battery connected, does not exceed ± 6%. Does not activate high voltage alarm
Output Ripple & Electrical NoiseStandard filtering on battery:

  • 24/48 VDC: 1% V rms
  • 130 VDC: 2% V rms

Enhanced filtering / battery eliminator:

  • 24/48/130 VDC: 30 mV rms

Enhanced filtering / battery eliminator off battery:

  • 24/48 VDC: 30 mV rms
  • 130 VDC: 100 mV rms
Current RatingsReverse Current from Battery: Less than 90 mA
Voltage RegulationVAC +10%, -12%: ± 0.25%
0 – 100% Load: ± 0.25%
Temp. 32 – 105ºF (0 – 40ºC): ± 0.25%
Freq. 50 – 60 Hz ± 3 Hz: ± 0.25%
Operating EnvironmentOperating Temperature: 32 – 105ºF (0 – 40ºC)
Elevation: 1000 m (3000 ft)
Relative Humidity: 0 – 95%
DimensionsBy Chassis Type:
S1: 483 x 435 x 454 mm (19 x 17 x 18 in)
S2: 483 x 657 x 454 mm (19 x 26 x 18 in)
S3: 483 x 902 x 456 mm (19 x 35 x 18 in)
Audible NoiseLess tan 62 dB (A)
 

FAQs

What are the mounting options for the charger?
The BC-2000 Charger can be mounted to the wall, on the floor, on a shelf, or on an EIA 19-inch or 23-inch rack (front or rear).

What kind of batteries are compatible to charge with the BC-2000?
The BC-2000 can charge batteries of a wide variety of types. These include Vented Lead-Acid (VLA), Valve Regulated Lead-Acid (VRLA), and Nickel-Cadmium (Ni-Cd).

What operating conditions should the charger be kept in?
The operating temperature range of the unit is -40 – 158ºF (-40 – 70ºC), and the operating humidity range is 0-95% relative humidity.

What method of cooling does the charger employ?
The BC-1000 was designed to stay cool by venting air using natural convection, which avoids potential electrical and safety issues which often arise when fans are used.

    Eagle Eye Power Solutions rispetta la tua privacy. Non vendiamo o vendiamo le tue informazioni personali a nessuno. Mai. Leggi la nostra politica sulla privacy.